Water Filters lower water contaminants by removing impurities. They usually do this through either chemicals, a biological process or physical removal.
Water is vital for life. The amount of water we consume in a day varies by opinion. Most health organisations recommend that you drink approximately 2 liters or half a gallon of water per day.
In reality the amount of water that most people drink in a day is quite different though. Most people struggle to drink at least 1 Liter of water in a day.
Consuming water is one thing, but what about the safety of the water you actually drink?
Everyday we drink water and often we don’t consider whether it’s safe and drinkable. Water resources are often under a great amount of stress, with the constant battle against pollution and the growing demand as populations grow. The demand for high quality water has never been greater.
So Why Exactly Should We Filter Our Water?
There are actually numerous reasons these include –
The smell of our water – often you may take a glass of water and discover an unusual aroma coming from the glass. This could be one of many things including chemicals, pesticides, bacteria and/or chlorine
The taste of our water – water from a tap can vary greatly based on where you live. The taste is often altered by the things we have mentioned above such as chemicals, bacteria and chlorine.
The water faucets in your home get there water from the local area feed. Water that you received goes through a treatment plant. We all presume that the water that comes from these treatment plant is clean, and contains no contaminants or unwanted additions.
This is not always true though. It is correct that the water is purified in these treatment plants, but the standards at these treatment plants vary greatly wherever you are in the world. How do you know if the water is good enough for you and your family.
When the people that run the treatment plant run tests on the water they usually do this straight after the water is filtrated. They test for water quality. The majority of Tess are of the highest standard and this is reassuring. The what they don’t account for is that the water is then passed into feeding pipes so that the water can reaches.
It is rare that your Water authority monitor the age of the water pipes and only ever fix them if there is a leak or a burst main.
Treatment works normally located on the outskirts or outside of your town or city. This means that the water needs to travel a great distance through water pipes before it reaches your faucet or tap.
Oftentimes the water Lines many years old and have little to no maintenance carried out on them. The water has a great distance to travel along these lines and whilst this is happening your filters water can become polluted and unclean. Just imagine what can enter whilst the water travels along the pipes!
Often these Old pipes can be breeding grounds for bacteria and harmful virus.
Have you ever thought the water coming from your faucet has an unusual smell? Or it may have an unusual taste to it.
This is a sign that the water has some form of biological issue.
The Issue Of Chlorine In Your Water
Most authorities that are responsible for treating your water do so usually using chlorine. This has for a long time been the standard method for treating water.
Fluorine is known to remove most of the micro organisms you find in water. The main downside is that chlorine changes the taste of your water.
Another aspect that is important to consider in terms of chlorine is how the chemical acts when it comes into contact with certain organic matter. In some cases this can results in the formation of compounds that can be dangerous to health. In some extreme cases this type of formation is believed to have been carcinogenic.
Cryptosporidium and other parasites
One of the main reasons for filtration is that we want to remove any dangerous bacteria and parasites from the water we drink.
Cryptosporidium is one of the most well-known parasites that can contaminated drinking water. Unfortunately cryptosporidium is resistant to chlorine. Cases in the past have resulted in severe diarrhoea and this type of illness can last for many weeks.
The only way to remove this parasite from the water supply to you is through mechanical means.
Chemical & Metal leaching
Chemicals and pesticides that were used many years ago still prevalent in the ground today. Many of these chemicals contained metals which have very long life spans.
These chemicals can sit in the soil around water lines for many years and then gradually leaking to the water.
Lead was often used years ago for plumbing. Some of this plumb work still exists today. This can result in lead leaching into the water
There are numerous ways in which chemicals and metals can find a way into our drinking water that we may never have considered before.
This is why it’s so important to not rely on our water providers to filter for us. We need to take on this responsibility ourselves.
What Methods Do Water Filters Use
Most people are quite surprised when they realise there are four main types of water filter that are available today. Each of these filter types has their own benefits and uses. They’re working different ways and the filters their cells are made from a variety of materials. So let’s discuss the four main types of water filter currently available:
Reverse osmosis water filter
These filters consist of usually more than one filter combined. The majority actually use three.
These three filters consist of a premembrane, a semi-permeable filter and a post membrane. Some of these reverse osmosis filters also use additional layers of filtration.
By far the most important layer is this semi-permeable filter – which is in fact the reverse osmosis filter the idea of this membrane is to stop a contaminant that is measured by its size and weight. Only very small compounds can then pass through to the next layer.
Distilled filter or distillation filter relies on the simple method of heating and Cooling to purify the water. As you probably know from other types of distillation the method doesn’t just boil the water, but it also holds onto the released steam and moves this into a separate area.
Ion exchange filter
These are the most common methods for reducing the hardness in our water. Hardness can affect the taste of your water.
This type of filter percolate water directly through ion exchange resins. These resins are bead like sphere’s. Ions contained in the water directly exchanged 4 ions contained on the beads.
When you’re hard water passes these resins, calcium and magnesium ions will bind to the spheres, this automatically displaces sodium into your water. This results in the water flowing out being softer as it contains more sodium.
The most common types of ion exchange are softening and deionization
Activated carbon filter
This is the type of filter that most people use in their homes. The main reason this filter is so popular is because of its cost and it’s size. It is also relatively easy to use. The filter itself uses granules that are activated carbon (based around charcoal) so that a contaminant is blocked. The porous charcoal type material attracts and traps chemical through absorption. Unwanted liquids or gases are for trapped by other liquids and solids.
How Do Water Filters Work?
Ok let’s take a look at each of these types of water filter and exactly how they carry out their work.
Reverse Osmosis Filter
This filter usually consists of a minimum of 3 stages, quite often five stages and sometimes more.
The first membrane removes physical contaminants such as dirt, metal rust and debris that might damage the second filter.
The second filter is normally the carbon one. This filter is focused on chemical elements such as fluoride and chlorine.
Membrane number 3 is also carbon, it is created much more densely so that it prevents minute particles making it through.
These three filters make sure that your drinking water is almost free from contaminants.
When your water gets to IV filter and this is required to stop contaminants based on size, weight and ion charge. Usually 99% of all harmful, unwanted components are removed.
The fifth stage is used to remove any bacterial based contaminant. This also removes any odors or unwanted taste in the water.
You can also go a step further, some advanced water filters will also have special filters that can alter the pH levels and introduce UV lighting.
These filters actually capture the steam produced after the water is boiled. Condensation forms as steam cools down and is then collected in a special container.
Water has a relatively low boiling temperature, and can be significantly less than most contaminants. The unwanted contaminants therefore remain in the original container as the steam forms.
There are some contaminants that will actually boil prior to the water boiling, this means they are unfortunately carried through to the second process and have to be removed in a different way.
Ion exchange filter
Inside the ion exchange filter are numerous sodium ions, exist within zeolite beads. As hardened water passes through the filter ions are attracted to calcium and magnesium in the water, and exchange of sodium is experienced. Limescale primarily consists of calcium and magnesium, so once these are removed then the water will be considerably soft and also have the benefit of better taste.
As most of us know sodium has a salty flavour, this will remain. The taste of this water is a matter of opinion, with some people not liking it.
People with high blood pressure or other ailments may not be able to drink water rich in sodium.
Activated carbon filter
As we mentioned before these filters work through absorbing unwanted contaminants.
Most unwanted impurities are removed as they pass through the carbon filter. The impurities are attracted to the carbon surface.
Charcoal filters are excellent at this job, though they have a big disadvantage in that they struggle to remove limescale.
There are other materials that the filter failed to attract such as fluoride, sodium and nitrates. Bacteria and microbes will also continue to remain in the water.
As this is a physical filter often it will block up with the particles and contaminants. This then we can zits functions and gradually over time it becomes useless unless replaced.
Which Is The Right Water Filter For You?
Finding the right water filtered me seem like a bit of a minefield at the moment. Don’t worry our website will guide you step-by-step through the using the correct water filter for you and you needs.
You can see that there are a variety of different filters to remove different contaminants from your water, but usually these filters can only perform specific tasks. They are often inefficient at removing other contaminants.
So how do we go about choosing the right one for you?
The first step is to analyse the water quality that you are currently receiving through your Faucet.
Water Testing Kit
The simplest way to get started is to use a water testing kit.
There are many such kids available today. The kit contains the number of paper type strips that once they come in contact with the water will change colour based on how the water is contaminated.
You can buy test kits for a variety of different material and chemical types such as pH levels, water hardness levels, chlorine, bacteria, lead and other metals, etc. It’s actually best to get individual strips that analyse each one of these, as opposed to choosing a kit that uses a single strip and claims to analyse all.
What Are We Actually Looking For When We Test?
When we choose to test the quality of our water we are actually looking for the amount of contaminants that are contained within it. As mentioned above these unwanted contaminants can vary.
A major test of your water quality is it’s ph level. As a guide for pH levels pH of 0 is completely acidic, while a pH of 14 is totally alkaline. pH of 7 is neutral.
Things to note in terms of the contaminants in your water are that hard water can cause build up of scale on your appliances, chlorine may help in disinfecting but the downside is the changing tastes, he goes without saying that pesticides and other related chemicals can be highly dangerous to health and especially harmful to a child.
If your water is acidic then it has a poor taste and can also increase corrosion of your pipes and fixtures.
Before you start using your testing kit
You should be clear before you start exactly how to use your testing kit, therefore is very important that you read any instructions clearly. Even missing one step in the process may result in a poor test result and waste you time and money in the long run.
Instructions include things such as temperature of the water and how you should apply the strips.
Starting your test
Once you have clearly read through all the instructions provided then it’s time to actually test your water. Follow the instructions closely but generally they all follow the same method which is – submerge each test strip into the water, you should keep it in the water for the correct amount of time that the instructions stipulate.
When your time is up, take the strip out of the water and remove any excess by shaking.
You should now wait the appropriate amount of time that the instructions tell you before you compare the colour of the strip to the chart provided.
Interpreting the results
When we compare the test strip that we’ve just submerged in the water to the provided colour chart then we can see exactly how your water is contaminated – if it is at all.
Each other strips provided should have a variety of indicators, this enables you to compare the correct one with the appropriate chart.
The colour of the tested strip will give you a clear guide on the levels of contamination of a particular substance.
It will also give you a guide if the levels are acceptable, unwanted or dangerous.
It is advisable to carry out the test a few times just to make sure that the kiss you are using is not showing any errors.
This is especially so if levels seem to be at a dangerous level.
Using our own senses
We can discover an awful lot just by using our own human senses.
Even experts will taste, smell and look at water visually when they are making their assumptions.
We all know that using our senses is not the most accurate form of testing, but it does give us some very important information as a starting point.
When experts test water through taste the very rarely swallow the water that they are testing.
Just like a wine tester never swallows the wind that they’re testing.
The taste of a water can reveal a number of things for example if water has a salty type taste pin this could mean the presence of chlorine ions or even sulphates.
Alternatively, if water has a bleachy type taste, then this can mean that there are high levels of chlorine still in the water.
Also if it has a metal taste it can indicate that there may be a low PH value or that the water has an excessive amount of minerals in it.
You should carry out the appropriate tests using testing kits just to confirm these taste tests.
In order to carry out a visible test of water you should use an empty glass and fill it then hold it up to a window or daylight. You should look for things floating in the water or if the water is cloudy.
Some of the most common particles that can be found are of a brown or Orangery colour which usually signifies deterioration in pipes or fixtures through rust.
If you have black particles floating then this can come from your internal pipes or hoses, usually this is caused by chlorine Decay.
If the water appears cloudy then this can indicate that your water is very hard. The cloudiness is caused by large amounts of either calcium or magnesium carbonate.
You should also look closely at the water’s colour in the glass.
Be sure to let your tap run for a minute or so just to let any physical contaminants runthrough.
If your water is off coloured, discoloured then this is a clear sign of contaminations.
Apart from looking at your water you should also look at your physical fixtures and fittings that connect your faucet to your mains water supply.
Check for any rust or deterioration of your pipes.
Always check for leaks
You can also look at your toilet bowl to see if any unusual staining is occurring such as rust or blue colouring.
Always fall back on your testing kids if anything obvious stands out.
The scent was smell of your water is one of the most telling aspects of contamination.
If you get an old eggy smell with your water then this is a surefire sign that bacteria has accessed your water somewhere along the journey.
Be careful though as sometimes we can confuse sense that come from the water, when actually they can come from a drain. This egg smell is often the result of an issue with your drains.
Take the water you have put into a glass and smell it away from your faucet or tap.
If the water still has the rotten egg smell then you need to test with a kit that will reveal unwanted bacteria.
This type of smell itself is relatively harmless, no it can be rather off-putting when you drink your water.
If you get a slightly bleachy smell in the water then this means that you may well have chlorine remaining in the water.
Be sure to always test hot and cold water taps to see if there’s any difference in smell.
Water quality reports
This is more of a professional approach to testing your water. You can contact your local Water authority and that then to conduct an official water quality test and provide you with the results.
Most local authorities must do this on a regular basis, so you may find that they already have one that they can provide you with.
This type of report is very useful when considering the practices the authority carry out at the treatment plant.
It does not however consider aspects that affect the water on its journey to you, especially in your local environment or home.
Take a look at the video below that will show you exactly how a simple water testing kit works –
Which type of test is best for you?
You need to carefully consider the appropriate tests that you need to carry out on your water supply. This will enable you to discover how contaminated your water supply is.
If you already have something in mind that is bothering you such as the taste or smell of your water, now you have a much clearer idea how to discover what the issue is.
Carrying out the tests above will give you a clear idea of the type of water filter that you require. Or if any further action may be needed in terms of contacting your local authority.
Be sure to check out our full guide on home water test kits.
Once you are clear about the steps you need to take them you can start looking at our guides and reviews into which filter is appropriate for you.
Which Water Filter Is Best For You?
Once you have a clear idea the current state of your water supply and what contaminants are currently in the water. You can then look at choosing the appropriate water filter to solve your issue.
Certain water filter systems can be extremely good at removing some contaminants, whilst they may not be as good at eliminating others.
Consider carefully what you want to achieve before you choose your water filter, obviously the amount you can spend comes into play – but you should never put your health before cost.
This is a brief overview of the filter types available and how you can use them based on the results you have received. We break down each of these filter types based on cost –
Smell Or Taste Issues
There are a number of Solutions available for removing unwanted smells or tastes from your water. Let’s look at each of these based on cost as a major Factor –
One of the cheapest and most cost-effective for removing bad smells or even taste is the activated carbon filter.
This method has been around for many hundreds of years and has been improved greatly.
You can get filters in a variety of different sizes to meet your needs.
One of the most successful methods for removing taste or smell contaminants from your water is by using ozone filters.
You must be careful with these as the ozone itself can alter the taste or even smell of the water
If budget is not really an issue when it comes to removing a bad smell or taste from your water then reverse osmosis maybe the answer. These are proven to be the best Solutions currently available. They use the combination of membranes and filters to filtrate your water.
Your water is then virtually taste and odor free.
There are a variety of filters available in order to change the hardness of your water that you receive.
The local cast option for removing hardness from your water is an ion exchange filter.
The reason this type of filter is low-cost as is simply changing the makeup of calcium and magnesium particles in the water, and changing them into sodium.
This immediately removes the problem of hardness in the water but the downside is that you get a salty taste to the water.
This type of filter at very low maintenance and are highly efficient at softening your supply.
If you are looking for an option that does not even come into contact with your water supply then you should consider the electronic softener.
This device fits easily onto your water inlet hose and can provide a relatively taste free version of soft water.
This type of filter does not remove all the solids in the water, and therefore it keeps the healthy minerals in your water supply.
If you have the budget available then the best solution is a whole house water filter. As the name suggests this filter system covers your entire water network for your home.
This has the added benefits of removing hard water from all your apparatus and equipment around the home not just your faucets.
For example your showers will not clog up due to the hardness of the water if you use a total house water filter.
These systems can be quite large but they are very powerful in what they can do for your water source.
If your water test reveal that your bacteria levels are at a high level then it’s important that you choose the correct water filter in order to remove this bacteria.
The simplest method is to use a distillation filter. You can find these relatively inexpensively, but the more features you had to it the greater the cost increases.
As we mentioned previously these filters are used to boil your water and capture contaminants through steam in a separate area.
The majority of bacteria is removed as the water bottles. Bacteria that actually boils before the water will not be removed.
So not all can be removed using this process.
If you are looking for a filter that has been specifically developed to remove bacteria then UV maybe your choice.
Their sole Focus is on removing bacteria from water.
You will find one to use a UV system on your water then bacteria will significantly drop and or disappear altogether depending on your type of water.
They are simple to operate and install.
As we know the more membranes and filters that we put the water through, the greater the number of contaminants that are removed.
Reverse osmosis uses a combination or filters and can be also used with the UV light option discussed above.
This type of filter will use a combination of chemical, uV, physical and semi-permeable filters to remove contaminants.
This is the most successful option if you are looking to remove bacteria from your water, no obviously cost may be an issue.
Features Equal Results When Considering Filters
We should now be clear on what water contamination is, how these contaminations can be removed and what we should look for in a water filter that solves our own water issues.
We need to consider the trade off the number of features a filter can have and practicality.
Often the greater the number of features the increase in the size or space requirement the filter needs.
The simplest type of water filter include ion exchange, activated carbon and electronic filters.
These filters usually take up the least space and are relatively simple to operate.
Where has reverse osmosis, larger ion-exchange, some distillation equipment and ozone filters take our great in amount of space and can be more demanding in terms of where you can put them.
In terms of practicality the largest and most space consuming types complete house water filters and deionization systems.
These often need to be placed in their own designated space such as a loft or basement area.
You may need to consider a portable water filter. You can discover a full guide to these types of filter here.
We now have quite a complete picture of all the different information required to choose a water filter.
We will now continue to go more in depth into how water filters work, including the technology available.
This will help you if you are still undecided about which type of water filter is best for you.
We also analyse a little deeper including the pros and cons of each type.
This is the original and oldest method of filtering water. It has been around for centuries. Methods of carbon filtration have gradually improved as time has gone by but still the main basics remain.
As we discussed previously the carbon absorbs unwanted contaminants through natural processes. The particles letterland wanted a trapped in the microscopic pores of the carbon.
Carbon filters can be used all over the world, regardless of the types of water you experience. They are very efficient and inexpensive to use and replace.
They are very effective at separating particles such as sediment and chlorine. They can also help in removing taste and odors.
They are not great at removing minerals and salt.
Granulated activated and powdered block are the two main types of carbon filter. The block filters are usually better because they have a greater surface for absorption.
They often consist of a number of layers in addition to the carbon for more effective filtering.
Granulated activated filters used fine grains of charcoal and they have a smaller surface than the Block.
They usually come in a variety of sizes depending on your needs.
Both of these types of filter have the same issues though. They become clogged up over reputed and also bacteria can grow inside the filter.
This means that regular change needs to happen.
Simple to replace
Very effective at removing odors and taste, chlorine.
Simple to install
No water softening
They can be a hover for bacterial growth
May need to replace regularly depending your water type
Ion exchange filters primarily consist of water softening and deionization.
Both these processes are very similar to each other.
As we discussed earlier deionization uses beads charged with ions and create an exchange between compounds.
Deionization results individually mineral free water, both good and bad and removed.
A softening filter exchanges calcium and magnesium for a salty result.
Both these filters provide you with softer water.
Minerals removed from water
Good and bad minerals removed from water
Can often be quite large in size
Salty taste may be left behind
Very simple method for filtering your water where we remove the contaminants by boiling water and steam separates contaminates into a different area.
Sometimes the contaminants that boil before the water reaches boiling point remain present in the original area.
Small in size
Simple to use
So contaminates remain after the process
Healthy minerals are removed
Can be time consuming process
This process involves using a number of different filters. The different filters vary depending on the model you choose.
They often consist of physical barrier, carbon filters, semi-permeable, chemical and often UV.
This type of process is very successful in removing contaminants.
Almost all contaminants are removed
Water can be quite tasteless
Some water is lost
This is one of the most effective means for bacteria removal from water.
It is highly effective at killing all bacteria.
The downside is that this is the only thing that the filter can do.
Very effective at its job of bacteria removal
Usually small in size
Needs a constant electricity supply
Limited to bacteria removal
Where Can We Mount Our Water Filter
Practicalities must come into play when you consider which water filter you going to buy.
If space is limited then only certain water filters may be an option.
We must consider where we are able to Mount our water filter.
On top of counter
This is a good option if hidden spaces limited. As usually most water filters are rather than likely it’s best to keep this type of filter quite small.
It’s simply a fact of placing your chosen option on top of your counter permanently in view.
The upside of this type of filter is that it’s convenience.
Take a look at some of the top current countertop water filters available
Under counter or under sink filters
This is a highly popular type of installation as it puts the water filter out of sight.
As we all know water filters and not the most attractive option so it’s good to put them out of sight if we can.
The are also quite practical when they can be located near the water source.
Tap Or Faucet Mount
As the name suggests this type of filter is mounted directly onto the faucet or tap.
It is a simple task of adjusting the aerator and connecting the filter to the faucet.
Portable pitchers and dispensers
These are really simple options that are simple to store and take up rather limited room.
They are also very basic option that have limited features those still effective.
Maintaining A Water Filter
It’s important to consider when purchasing a water filter the amount of maintenance and effort you need to put into keeping a quality source of water.
Depending on the type of filter you choose different parts may need replacing.
These may include-
Physical Filter changes
The main types of filter that quiet filter changes are activated carbon and reverse osmosis.
It goes without saying that these filters will need changing at some stage.
You can actually do research into how long each filter is expected to last through the products manufacturer.
This is not always accurate but can be used as a guide.
This is a requirement in any ion exchange filter.
The beads within the filter will need changing after a period of time.
They have a limit to their charge, once the charge is used up they don’t become of no use.
This is a particular requirement of a UV filter.
Some more advanced reverse osmosis systems also have UV bulbs included.
As with all light bulbs at some stage they will need changing.
Again it’s important to check the manufacturers website for details of how long they expect a boat to last.
Not all manufacturers specify this.
It’s also important to know where you actually get replacement items for all of these.
Also consider the costs as some parts may be very expensive.
The Key Benefits For Why You Should Use A Water Filter
Filtered water removes all impurities and things that are bad for you. Remove chemicals and bacteria. If you choose the correct filter then you will maintain all the good minerals in the water.
If you stop drinking bottled water and instead use a water filter to purify your drinking water then you are avoiding plastics that contain bisphenol A or BPA. BPA is an industrial chemical that has been used to make certain plastics and resins for many years.
Many kind of calls can Leach into our water Lines in a variety of different ways and they are Common trace amounts of drinking water.
A good water filter can drastically reduce the amount of chemicals we ingest.
Another benefit of not using bottled water is there to remove plastic completely from the method of water consumption.
If we all stopped using plastic bottled water and started filtering out water instead, then this would lead to massive environmental benefits.
Remove unwanted odours/ improve water taste.
It doesn’t matter how bad the water tastes or smells when it reaches your faucet, you can always change it by using a good water filter.
You may see buying a water filter as a cost, though this will be relatively low when considered with the cost of purchasing bottled water in the long run.
Consider your child
Children are more vulnerable then adults to bacteria and chemicals that can be commonly found in water.
Substances such as nitrates can be particularly bad for kids.
Chlorine is one of the most common ways of disinfecting water. Often this chemical can remain in some shape or other within your water that you drink.
Improve your appearance
Drinking lots of water has a proven effect on our appearance. Healthy skin and hair can be a benefit of drinking the necessary daily amount.
Be sure that the water you are drinking is of the highest quality to improve these benefits.
Most water sources contain a huge variety of toxins. These toxins may not be of huge levels but of reputed this can take effect. Using a water filter reduce the amount and effect that these toxins can have on you.
The difference between water purification and water filtration
Water purification is a process by which we make water pure. This means it removes all contaminants in the water.
All harmful bodies within the water and helpful minerals are completely removed
Water filtration uses a system of filters to remove contaminate.
With the process of water filtration we can choose which contaminates we want to remove and which we want to keep.
How can we keep important minerals in our water
It’s important to know that certain water filters allow you to keep valuable minerals in the drinking water.
That’s why it’s important to know exactly what the issue is with your water and what contaminates you have in there.
Once you discover this you can then assign the correct water filter to do the job.
For example if the issue is bacteria then you can use a UV filter to remove all the unwanted bacteria whilst leaving the important minerals still in the water.
Our Summary & Further Guidance
Most people don’t realise how important a role water filters play in our lives.
This is changing quickly though.
It’s important to understand that we control the quality of the water that we drink and use for everyday tasks.
It’s important to consider the water that are family are consuming each and every day.
Your local authority can only do so much it’s impossible for them to monitor the entire water network.
Water filters may seem like an unnecessary expense initially, but if we use them in the long run then it’s actually a money saving exercise.
It removes the need to buy bottled water and the many downsides that bottled water brings.
Water filters also help around the house especially if you have hard water. Limescale causes a number of problems and creates the premature end too many appliances.
It can also help you with keeping your skin and hair healthy. Preventing hot water from taking effect on you.
Thank you for visiting us at Best Of Water Filters!
Have A Question?
7 Best Under Sink Water Filters (Reviews & Complete Buying Guide For 2019)Under sink water filters are an excellent option for filtering. They have excellent efficiency and are improving all the time in terms of the amount of contaminants they can remove from...
8 Best Shower Filters (Reviews & Complete Buying Guide For 2019)The primary reason for using a shower head filter is for hard water issues. As we all know hard water is very harsh on the human body. It can dry your skin and caused particular problems for people...
It's a fact that only around 15% of the entire United States has soft water that is naturally occurring. That means that 85% of us must deal with the problems that hard water brings. River or little water is naturally soft, the hardness comes into the water when it...
Stay Up to Date With The Latest Reviews & Updates
Read Our Reviews
DIscover the latest water filtration products on the market today
Join Our Newsletter
Get our latest guides and discount coupons direct to your inbox.
Follow us on Social Media